收藏本站 提供:电热管价格和电热管规格型号大全,还提供电热管接线、选型的问题,特耐佳电加热器高端电热供应商。

铁氟龙加热管价格-铁氟龙电加热管图片

型号:未知

报价:面议

联系电话:051257123258

产品介绍

用户评价

今日出厂产品展示及部分报价

铁氟龙电加热管

铁氟龙电加热管

详细介绍铁氟龙加热管 常用铁氟龙加热管是一种用四氟套管制成的新型耐强腐蚀的电加热器,用于各类腐蚀性液体的加热。 具有优良抗老化性和较好的绕曲性能, 采用低表面负荷设计。 铁氟龙加热管可分两种,一种是将加热管的 表面直接喷涂氟塑料物质,另一种是在铁质加热管和铜质加热管的外层套上氟塑料套管构成。 铁氟龙电加热管是一种新型耐强腐蚀的电加热管,用于各类腐蚀性液体的加热。具有优良抗老化性和 较好的绕曲性能,采用低表面负荷设计。接头采用全封闭式防酸碱,不发热段及过热安全保护系统完全按 照客户的需求订做。 完好的保证了加热器不易烧毁、 使用寿命长、 全密封、 不腐蚀、 不漏电、 带接地保护、 安全可靠。适用温度在 110°C 以下。 ( 在很稠的液体内加热,必须配置搅拌 ) 蚊香型 – 铁氟龙电加热管具有热效率高, 节能省电, 性价比高的优势, 可设计多种结构形式, 如螺旋型、 L 型、 U 型、 W 型、蚊香型、组合型等。已被多家上市公司所认可,并作为其蚊香型铁氟龙电加热器的长期 供应商。我们可承接非标产品,在电压、功率、规格大小和产品形状,以及接线方式,可按照客户的需求 让工程师设计,欢迎来图来样定做生产。 “L”型 – 铁氟龙电加热管产品: 1) 铁氟龙电加热器选用优质的不锈钢 (sus316 或 sus304) 电热管内芯, 外套铁氟龙管 (PTFE) 制作, 耐腐 蚀性强,适用于各类腐蚀性强的液体加热。 2) 加热器采用低表面功率设计 (1.5w/c ㎡ ) ,确保产品的使用寿命。 3) 电热器的安装位置需注意防止溶液中固体沉积于电加热器表面,或液体太浓稠、液面过低都会因表 面散热不良而烧坏铁氟 (PTFE) 。 4) 电加热器的尺寸不可随便改小,及改小表面积,否则会使电加热器的表面功率过大,影响电加热器 的使用寿命。 5) 所有电加热器均可配过温保护或 PT-100 感温探头,确保产品使用寿命及设别安全。 6) 接头采用全封闭式防酸碱,不发热段及过热安全保护系统完全按照客户的需求订做。 螺旋型 – 铁氟龙电加热管, 适用于各种带腐蚀性的液体加热, 是电镀、 电解、 除油、 酸洗、 化学镀镍磷、 阳极氧化、铝泊、冶炼、化工、医药等加热设备的最佳选择 ! ( 本产品可以更具客户要求定做,提供图纸, 电压,功率,尺寸 ) 铁氟龙加热管注意点: 1. 要防止被加热液体过于黏稠,固态物质粘连在管子表面,烧坏铁氟龙 2. 建议增加温控保护器,以防温度超过 110 度,烧坏管子 3. 接头部分切忌自主拆开,以防酸液渗透进入 4. 功率要求能控制在 1.5w/c ㎡以下最好。最高不要超过 2W/c ㎡。 [1] 铁氟龙加热管的用途 铁氟龙加热器是电镀、电解、除油、酸洗、化学镀镍镀磷、氢氟酸、阳极氧化、铝泊、冶炼、化工、 医药、食品等腐蚀性的液体加热、冷凝、蒸发、浓缩等的最佳加热器选择 ! 铁氟龙加热管特点 1. 选用优质的不锈钢 (SUS316 或 SUS304) 电热管内芯,外套铁氟龙管 (PTFE) 制做,耐腐蚀性强, 适用于 各类腐蚀性液体加热。 2. 低表面功率设计 (1.5KW/CM), 确保产品的使用寿命。 3. 电加热器的安装位置需注意防止溶液中固体沉积于电加热器表面,或液体太浓稠、液面过低都会因 表面散执热不良而烧坏铁氟龙管 (PTFE) 4. 形状分为直立式及底部加热的“L”、“Z”字型。铁氟龙加热管 Details of Teflon heating pipe heating pipe is a kind of commonly used Teflon PTFE sleeve made of the new electric heater of strong corrosion resistance, used for heating various corrosive liquids. With excellent aging resistance and good bending performance, low surface load design. Teflon heating pipe can be divided into two kinds, one kind is the surface heating pipe directly spraying fluorine plastic material, the other is in the outer sleeve pipe and the copper iron heat on the heating tube fluorine plastic bushing. Teflon electric heating tube is a new type of strong corrosion resistance of the electric heating tube heating, for all kinds of corrosive liquid. With excellent aging resistance and good bending performance, low surface load design. The joint use of fully enclosed anti-acid, no heat and overheating protection system completely according to customer requirement. Well ensure heater is not easily burned, long service life, full seal, no corrosion, no leakage, with ground protection, safe and reliable. Applicable temperature below 110 ° C. (heating, in the very thick liquid must be configuration mixing) mosquito-repellent incense – Teflon electric heating tube has the advantages of high thermal efficiency, energy saving, high ratio of performance to price advantage, can design a variety of structural forms, such as the spiral type, L type, U type, W type, type, combination type mosquito-repellent incense. Has been recognized by many listing Corporation, and as long as the mosquito-repellent incense type Teflon electric heater suppliers. We can undertake non-standard products, voltage, power, size and shape of the product, as well as the connection mode, can according to customer demand for engineers to design, welcome customized drawings and samples production. “L” – type Teflon electric heating tube products: 1) Teflon electric heater use high-quality stainless steel (SUS316 or SUS304) electric heating tube core, outer Teflon tube (PTFE) production, corrosion resistance strong, suitable for all kinds of corrosive liquid heating. 2) the heater adopts the design of low power on the surface (1.5w/c m), to ensure that the service life of the product. 3) the installation position of the heater must pay attention to prevent the deposition of solid solution to the surface of an electric heater, or too thick liquid, liquid level too low because of poor heat burn surface of iron (PTFE) fluoride. 4) electric heater size can not be easily changed little, and small surface area, otherwise it will make the surface of the electric heater power is too big, affect the service life of the electric heater. 5) all electric heater can be equipped with a thermal protection or PT-100 temperature probe, to ensure that the service life of products and facilities of other security. 6) joint adopts a totally enclosed anti-acid, no heat and overheating protection system is fully in accordance with customer demand customized. Spiral – Tie Fulong electric heating tube, a liquid in various corrosive heating, electroplating, electrolysis, degreasing, pickling, chemical nickel phosphor plating, anodizing, aluminum foil, smelting, chemical industry, medicine and other heating equipment, the best choice! (this product may be more customer requirements, provide the drawings, voltage Tie Fulong, power, size) heating pipe note: 1 to prevent the heated liquid is too thick, solid material in the pipe surface adhesion, burn Tie Fulong 2 suggested increasing the temperature protection device, in order to prevent the temperature exceeds 110 degrees, the 3 joint part should not burn independent apart, to prevent liquid penetration into the 4 power requirements can best control in 1.5w/c ㎡ below. The highest do not exceed 2W/c ㎡.

相关产品

*

*

051257123258
重庆时时彩 吉林快3走势 重庆时时彩 重庆时时彩 重庆时时彩 海鸥娱乐系统 重庆时时彩 吉林快3 重庆时时彩 重庆时时彩